InvNorm Calculator (Inverse Normal Distribution)

Enter a probability to get the z-score or x-value that cuts off that area under the normal curve. It works like invNorm(area, μ, σ) on a TI-84, and adds left, right, center and two-tail modes.

Enter the left cumulative probability P(X ≤ x).

Enter a probability from 0 to 1 or a percentage from 0% to 100%.

Enter a probability to see results.

Enter a probability (area) and this invNorm calculator returns the z-score, or, with a mean and standard deviation, the x-value, that cuts off that area under the normal curve. It works like invNorm(area, μ, σ) on a TI-84: by default the area is to the left, and you can switch to right-tail, center or two-tail problems without converting by hand. For example, invNorm(0.95) = 1.64485. Each result comes with a shaded graph, the steps, and the same calculation in Excel, R and Python.

InvNorm in 30 seconds

What does invNorm do?

invNorm (inverse normal) takes an area under the normal curve, a probability, and returns the value that cuts off that area. By default the area is to the left, so invNorm(p) answers "which z-score has p of the distribution below it?" It is the reverse of normalCdf. Use it to find a z-score from a probability, a percentile cutoff or a critical value.

Does invNorm give a z-score or an x-value?

Both, depending on what you enter. invNorm(p) returns a z-score from the standard normal distribution (μ = 0, σ = 1). invNorm(p, μ, σ) returns an x-value on your data's scale, computed as x = μ + z·σ.

invNorm(0.95) and other values you'll use most

Left-tail area pinvNorm(p)Typical use
0.90 1.28155 90th percentile
0.95 1.64485 one-tailed 5% cutoff
0.975 1.95996 two-tailed 95% critical value
0.99 2.32635 one-tailed 1% cutoff
0.20 −0.84162 20th percentile

Select a value to load it into the calculator.

How to use this invNorm calculator

  1. Pick the area your problem describes: left tail, right tail, middle area or two tails.
  2. Choose the distribution: Standard Normal for a z-score, or Custom Normal to enter μ and σ and get an x-value.
  3. Enter the probability: 0.95, .95, 95 and 95% all work.
  4. Read the result: the z-score or x-value, the percentile, a shaded graph, the steps, and the matching TI-84, Casio, Excel, R and Python entry.

Left, right, center or two tails: which area to enter

On recent TI-84 Plus CE operating systems the full syntax is invNorm(area[, μ, σ, tail]), where tail is LEFT, CENTER or RIGHT. This calculator uses the same three options and adds a two-tails option:

Not sure which one you have? See left tail vs right tail probability.

Standard normal vs custom mean and standard deviation

Use Standard Normal when the question asks for a z-score or critical value. Use Custom Normal when it gives a mean and standard deviation (test scores, heights, measurements) and asks for a cutoff in those units. If you are given a variance instead, tick the variance option.

Reading your result: z, x and percentile

The z-score tells you how many standard deviations the cutoff sits from the mean. The x-value is that cutoff in your data's units. The percentile is the share of the distribution below the cutoff. A plain-language line under each result explains it in the form most homework answers expect, for example "95% of values fall below 1.64485."

No graphing calculator? This page works in any browser. You can also reverse-look-up a standard normal (z) table, though that is limited to 2 decimals.

InvNorm examples with solutions

Left tail: the 90th percentile

Test scores are normally distributed with mean 500 and standard deviation 100. What score marks the 90th percentile?

p = 0.90 (left tail). z = Φ−1(0.90) ≈ 1.28155, so x = 500 + 1.28155 × 100 ≈ 628.16. On a TI-84: invNorm(0.90, 500, 100).

Try this example in the calculator

Right tail: a top-5% cutoff

Bolt diameters are normally distributed with mean 10 mm and standard deviation 0.2 mm. What diameter is exceeded by only 5% of bolts?

Right tail p = 0.05, so the left area is 0.95. z ≈ 1.64485, so x = 10 + 1.64485 × 0.2 ≈ 10.32897 mm. On a TI-84: invNorm(0.95, 10, 0.2).

Try this example in the calculator

Center: a 95% interval

For a standard normal distribution, center mode with p = 0.95 gives z ≈ ±1.95996, the familiar ±1.96. For mean 100 and standard deviation 15, the middle 95% of values fall between about 70.60 and 129.40.

Try this example in the calculator

Two tails: critical values for α = 0.05

For a two-tailed test at α = 0.05, enter 0.05 in two-tails mode. The 0.05 splits into 0.025 per tail, and the critical values are z ≈ −1.95996 and z ≈ 1.95996.

Try this example in the calculator

Want more practice? See more inverse normal examples.

InvNorm vs NormalCDF: which one do you need?

normalCdfinvNorm
You enterValues (lower, upper, μ, σ)An area (probability), μ, σ
You getAn area (probability)A value (z-score or x-value)
ExamplenormalCdf(−1E99, 1.96) ≈ 0.975invNorm(0.975) ≈ 1.96
Question sounds like"What proportion scores below 650?""What score is at the 90th percentile?"

Rule of thumb: if your question gives a percentage and asks for a value, use invNorm. If it gives a value and asks for a percentage, use normalCdf and our normal CDF calculator. Full comparison: invNorm vs normalCdf.

InvNorm on your calculator or software

TI-84 Plus and TI-83

Press 2nd → VARS (DISTR) → 3:invNorm(, then enter invNorm(area, μ, σ). The area is the left-tail area unless your OS offers the tail option. For a right-tail 0.05, enter 0.95. Full TI-84 guide →

Casio

On the fx-9750GIII, fx-9860 and fx-CG50: STAT → DIST → NORM → InvN, then choose Left, Right or Central and enter the area, σ and μ. Menu labels vary slightly by model. Full Casio guide →

Excel and Google Sheets (NORM.INV, NORM.S.INV, NORMSINV)

Standard normal: =NORM.S.INV(p) (older name =NORMSINV(p)). Custom: =NORM.INV(p, μ, σ) (older =NORMINV). Google Sheets accepts both names. Full Excel guide →

R and Python (qnorm, scipy.stats.norm.ppf)

R: qnorm(p) or qnorm(p, mean = μ, sd = σ). Python: from scipy.stats import norm; norm.ppf(p, loc=μ, scale=σ). Both use the left-tail area, like the TI-84.

Common z critical values

Confidence levelα (significance)α/2Critical z (±)
80%0.200.10±1.28155
90%0.100.05±1.64485
95%0.050.025±1.95996
98%0.020.01±2.32635
99%0.010.005±2.57583

Need other levels or t and chi-square values? Use the critical value calculator, or build an interval with the confidence interval calculator.

Inverse normal formula and how accurate this calculator is

The formula: z = Φ⁻¹(p), x = μ + zσ

For the standard normal distribution, invNorm returns z = Φ−1(p), where Φ is the normal cumulative distribution function (CDF). For a normal distribution with mean μ and standard deviation σ, the cutoff is x = μ + z·σ. Φ−1 has no closed form, so every calculator uses a numerical method.

Method and verification

This calculator starts from Peter Acklam's rational approximation of Φ−1 and refines it with one Halley step against a double-precision normal CDF. Everything runs in your browser and nothing is sent to a server. Results agree with R's qnorm to at least 12 decimal places:

pThis calculatorR qnorm(p)
0.901.28155156551.2815515655
0.951.64485362701.6448536270
0.9751.95996398451.9599639845
0.992.32634787402.3263478740

To 16 significant digits, Φ−1(0.95) = 1.644853626951473. Excel's NORM.S.INV and the TI-84's invNorm agree to the 5 decimals shown in the tables above. See the methodology page for the algorithm and references.

InvNorm FAQs

invNorm is undefined at exactly 0 or 1 because the normal curve never reaches its ends: the cutoff would be −∞ or +∞. A TI-84 returns a domain error, and this calculator asks for a value strictly between 0 and 1.

Yes. 0.95, .95, 95 and 95% are all read as a probability of 0.95. A TI-84 only accepts the decimal form, so type 0.95 there.

Follow your course. Many textbooks round z-scores to 2 decimals (the precision of a z table) and x-values to 2–4 decimals. A TI-84 displays up to 10 significant digits. Use the Decimal places menu to match what your teacher expects.

A left-tail probability below 0.5 means the cutoff sits below the mean, so z is negative. For example, invNorm(0.20) ≈ −0.84162. If you expected a positive value, check whether your question describes the area to the right; if so, use right-tail mode or enter 1 − p.

Tick "Use variance instead of standard deviation" in Custom Normal mode and enter the variance; the calculator takes the square root for you. On a TI-84, enter σ = √variance.

A printed z table only lists probabilities for z to 2 decimals, so a reverse lookup picks the nearest entry. This calculator solves for z directly, so it is more precise. For example, a table gives 1.645 for 0.95, while the exact value is 1.64485.

Related statistics calculators

All calculations run in your browser; no data is sent to a server. See our privacy policy.